Channel<N>:Probe:precprobe:mode - Agilent Technologies Infiniium 90000 Series Programmer's Manual

:CHANnel<N>:PROBe:PRECprobe:MODE
Command
:CHANnel<N>:PROBe:PRECprobe:MODE {PROBe | CABLe}
The :CHANnel<N>:PROBe:PRECprobe:MODE command chooses between
PrecisionProbe or PrecisionCable AC response probe calibration.
<N> An integer, 1- 4.
Example This example chooses PrecisionProbe calibration for the probe on channel
1.
myScope.WriteString ":CHANNEL1:PROBE:PRECprobe:MODE PROBe"
Query
:CHANnel<N>:PROBe:PRECprobe:MODE?
The :CHANnel<N>:PROBe:PRECprobe:MODE? query returns the current
PrecisionProbe/PrecisionCable selection for the selected channel.
Returned Format
[:CHANnel<N>:PROBe:PRECprobe:MODE] {PROBe | CABLe}<NL>
See Also
•
•
•
•
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
":CHANnel<N>:PROBe:ACCAL"
":CHANnel<N>:PROBe:PRECprobe:CALibration"
":CHANnel<N>:PROBe:PRECprobe:ZSRC"
":CHANnel<N>:PROBe:PRECprobe:BANDwidth"
on page 217
on page 236
on page 238
on page 235
12
Channel Commands
237