HP 8560A Service Manual page 34

Table 1-4. Recommended Test Equipment (continued)
Type N (m) to SMA (f)
Length: 291 cm (36 in.)
Cable, 5052 Coaxial Connectors: BNC (m)
Length: 2 122 cm (48 in.)
Required w/Performance Test Software
Cable, HP-IB
(12 required)
Required w/HP 85629B Test & Adjustment Module
Length: 2 m (6.6 ft.)
Cable Frequency Range: 10 kHz to 6.9 GHz
(three required)
Maximum SWR: <1.4 at 6.9 GHz
Maximum Insertion Loss: 2 dB
Connectors: APC 3.5 (m), both ends
Length: 2 91 cm (36 in.)
No Substitute
Photometer/
Radiometer
Controller Required to run Operation Verification Software
No substitute.
Power Supply Output Voltage: 224 V dc
Output Voltage Accuracy: <f0.2 V
Tuning Tool
P = Performance Tests; A = Adjustments; M = Test & Adjustment Module; T = Troubleshooting
V = Operation Verification
1-16 General Information
ment Substitution
HP 10503A
HP 10833B
8120-4921
Tek JlG-TV A
HP 9816A, V
HP 9836A/C,
or HP 310
HP 6114A A
8710-1010 A