Static-Safe Accessories; Returning Instruments For Service; Service Tag; Original Packaging - HP 8560A Service Manual

Static-Safe Accessories

HP Part
Number
Set includes:
9300-0797
ground wire. (The wrist-strap and wrist-strap cord are not included. They must
be ordered separately.)
9300-0980
Wrist-strap cord 1.5 m (5 ft)
Wrist-strap, color black, stainless steel, without cord, has four adjustable links
9300-1383
and a 7 mm post-type connection.
9300-l169 ESD heel-strap (reusable 6 to 12 months).

Returning Instruments for Service

Service Tag

If you are returning the instrument to Hewlett-Packard for servicing, fill in and attach a blue
service tag. Service tags are supplied in the back of this chapter.
Please be as specific as possible about the nature of the problem. If you have recorded any
error messages that appeared on the screen, or have completed a performance test record, or
have any other specific data on the performance of the analyzer, please send a copy of this
information with the unit.

Original Packaging

Before shipping, pack the unit in the original factory packaging materials if they are available.
If the original materials are unavailable, identical packaging materials may be acquired
through'any Hewlett-Packard Sales and Service Office. Descriptions of the packaging materials
are listed in Figure l-3.

Other Packaging

Caution Analyzer damage can result from using packaging materials other than those
specified. Never use styrene pellets in any shape as packaging materials. They
do not adequately cushion the equipment or prevent it from shifting in the
carton. They cause equipment damage by generating static electricity and by
lodging in the analyzer fan.
Repackage the analyzer in the original packaging materials or with commercially available
materials described in steps 4 and 5, below.
1. Attach a completed service tag to the instrument.
1-8 General Information
Table 1-2. Static-Safe Accessories
Description
static control mat
3M 0.6
m x and 4.6 cm (15 ft)
1.2 m (2 ft 4 ft)
x