Preparation Before Use; Lithium Battery Installation; Lithium Battery Charging - AgfaPhoto Realishot WP8000 User Manual

Hide thumbs Also See for Realishot WP8000:

Table of Contents

Available languages

 PREPARATION BEFORE USE:

 Lithium battery installation

Please install the lithium battery supplied with the camera before using it according to the

following instructions.

1. Slide the battery cover on the bottom of the camera to the left to access the battery

compartment:

Install

battery as follows:

2. Install the battery in the correct polarity.

3. Then close the battery cover and slide it to the left to lock it in place.

Note: Please remove the battery if you are not going to use the camera for a while.

 Lithium battery charging

To recharge the lithium battery, simply connect the camera (without removing the battery) to

your computer using the USB cable provided in the box. The red LED on the back of the

camera will light up to indicate that the battery is being charged, and will turn off when fully

charged. You can also charge the lithium battery by connecting the camera to AC power if you

have an adapter to which you can connect the USB cable.

the

lithium

Table of Contents