Table of Contents
Advertisement
4.
Define the Density
(a)
Select Density and select from -3 to +3. Normally
this will be 0 unless the copy documents are either
very light or dark. In this case compensation can be
made accordingly.
5.
Define the Media you are using.
(a)
Select the relevant media from the drop down list
(A4, Letter or Legal).
Address book
The following section describes how to add/remove/modify Email
addresses to/from the Address Book.
To operate the Address Book, select Menu>Scanner
Menu>Address Book in Menu Mode.
Adding a new Email Address:
(a)
Move the cursor to the Address Book and press the
Right or Enter key to display the Email Address/
Group Address Selection screen.
(b)
Select Email Address and press the Right or Enter
key.
(c)
Using Up/Down key, move the cursor to the
number you want to add (#00~#99), and press the
Right or Enter key.
(d)
Select an Address on the displayed screen.
(e)
Enter an Email Address you want to add. You can
enter up to 80 characters as an Email Address.
(f)
When you have finished entering the Email Address,
Name item (to set a Name) appears. You can enter
a name only after you entered an Email Address.
(g)
Select Name to display in Screen Entry screen.
Enter a name. You can enter up to 16 characters. If
you do not enter a name, this column remains blank.
(h)
Move the cursor to Done and press the Enter key to
move to Address Book Menu screen.
Operation > 71
Advertisement
Table of Contents
