Pair Devices - Nokia N81 User Manual

Device icons: computer,
video device, and other device.
To interrupt the search, select Stop.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See "Pair devices", p. 65.
5 When the connection has been established,
data is shown.
Tip! When searching for devices, some devices may
show only the unique address (device address).
To find the unique address of your device, enter the
code *#2820# in the standby mode.

Pair devices

To pair with compatible devices and view your paired
devices, in the Bluetooth application main view, press
Before pairing, create your own passcode (1-16 digits), and
agree with the owner of the other device to use the same
code. Devices that do not have a user interface have a
factory-set passcode. The passcode is used only once.
1
To pair with a device, select
device. Devices with Bluetooth connectivity within
range start to appear on the display.
2 Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
phone, audio or
Sending
.
Options > New paired
Copyright © 2007 Nokia. All rights reserved.
Some audio enhancements connect automatically to your
device after pairing. Otherwise, scroll to the enhancement,
and select Options > Connect to audio
Paired devices are indicated by
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorised—Connections between your device and
this device can be made without your knowledge.
No separate acceptance or authorization is needed.
Use this status for your own devices, such as your
compatible headset or PC, or devices that belong to
someone you trust. indicates authorized devices in the
paired devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings,
select Options > Delete all.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
placed in the Inbox folder in Messaging. Messages
device.
in the device search.
is shown, and the item is
65