Adjust Color And Lighting - Nokia N81 User Manual

To change the main settings, select
and from the following:
Image quality—Print 2M - Large
resolution), Print 1M - Medium
MMS 0.3M - Small
print the image, select
Medium. To send the image through MMS, select
0.3M - Small.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the
image to a certain album in the gallery. If you select Yes,
a list of available albums opens.
Show captured image—Select
captured image after it is taken, or
continue taking pictures immediately.
Default image name—Define the default name for the
captured images.
Extended digital zoom
(continuous) allows the zoom increments to be smooth
and continuous between digital and extended digital
zoom, On (paused)
at the digital and extended digital step point, and
allows a limited amount of zoom while retaining the
image resolution.
46
Options >
(1600x1200
(1152x864 resolution) or
(640x480 resolution). If you want to
Print 2M - Large or Print 1M -
On if you want to see the
Off if you want to
(main camera only)—On
allows the zoom increments to pause
Copyright © 2007 Nokia. All rights reserved.
Settings Capture tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Restore camera
values to the camera settings.
MMS
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions.
The following flash modes are available for the still image
camera: Automatic
Off ( ).
To change the flash mode, in the active toolbar, select the
desired flash mode.

Adjust color and lighting

To enable the camera to reproduce colors and lighting
Off more accurately, or to add effects to your pictures or
videos, use the scroll key to scroll through the active
toolbar, and select from the following options:
settings—Select Yes to return the default
( ), R. eye redu. ( ), On ( ), and