Table of Contents
Advertisement
NetVanta 300 Series Hardware Installation Guide
Rear Panel Interfaces and LEDs
ADSL Interface
The
port on each NetVanta 300 Series unit is an RJ-11C connector. See Table A-1 on page 29 for the
ADSL
ADSL port pinouts. The following charts show some of the ADSL port features.
Specification Type
ITU G.992.1 (G.dmt)
ITU G.992.2 (G.lite)
ITU G.992.3 (ADSL2)
ITU G.992.5 (ADSL2+)
ANSI T1.413 Issue 2
Dynamic Rate Adaptation (DRA)
Seamless Rate Adaptation (SRA)
Bit Swapping
Dying Gasp
10/100BaseT Ethernet Interface and Activity LEDs
The
ports on the NetVanta 300 Series are RJ-45 connectors with LEDs. The amber activity
ETHERNET
LED flashes when data traffic is being sent or received on the Ethernet port. The green link LED is on
when the unit has a good connection to the LAN. (As mentioned earlier, the NetVanta 344 and
NetVanta 347 have four Ethernet ports, each with its own activity and link LEDs.) See Table A-2 on page
29 for the Ethernet port pinouts. The Ethernet port provides the following:
•
10BaseT or 100BaseT with a single connector
•
Auto-negotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
•
Auto MDI/MDIX
61200422L1-34D
NetVanta 340/NetVanta 347
Annex A
Annex B
Yes
No
Yes
No
Yes
No
Yes
No
NetVanta 340/NetVanta 347
Copyright © 2006 ADTRAN, Inc.
Annex L
Annex A
N/A
Yes
N/A
Yes
Yes
Yes
N/A
Yes
NetVanta 344
Yes
Yes
No
Yes
Yes
Physical Description
NetVanta 344
Annex B
Annex L
Yes
N/A
Yes
N/A
Yes
Yes
Yes
N/A
Yes
Yes
Yes
Yes
Yes
23
Advertisement
Table of Contents
