Connection; Installation - Mitsubishi XD221U-ST Software Manual

Preparation/SetUp (continued)

Connection

To.LAN.terminal
• Use.a.straight-through.category-5.cable.for.LAN.connection.
• Don't.touch.the.metal.parts.of.the.LAN.connector.and.LAN.cable.because.static.electricity.may.be.discharged.
from.your.body,.causing.damage.to.the.projector.
STANDBY MODE (See User Manual page 20.) in INSTALLATION MENU is set to LOW as a factory default.
When STANDBY MODE is set to LOW, LAN connection is not available. To enable the LAN connection,
set the STANDBY MODE to STANDARD.

Installation

Before.starting.installation,.be.sure.to.read."ReadMe.txt".contained.in.the.CD-ROM..
1
Copy.two.files.(DI_4..3.6.msi,.Setup.exe).contained.in.the.Tools.folder.of.CD-ROM.to.the.hard.disk.of.
your.personal.computer.
2
Double-click.the.file.named.Setup.Exe.
3
When.the.following.window.appears,.click.Next.
LAN.cable.(option)
(00BASE-TX.or.0BASE-T.should.be.supported.)
LAN.cable.(option)
(00BASE-TX.or.0BASE-T.
should.be.supported.)
EN-3
Computer
External.HUB