Miele S 240 series Operating Instructions Manual page 11

Attaching the floorhead
^ Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
^ To release the floorhead from the
suction tube, press the locking button
(see arrow) and pull the suction tube
away from the floorhead.
The floorhead can be used for all
normal cleaning of carpets and rugs.
It can also be used with the brush
protruding to vacuum hard flooring.
For hard flooring, such as stone and
parquet, we recommend using one of
the special Miele floor brushes (see
"Optional accessories").
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
Setting the floorhead to suit
the type of flooring
Vacuum carpets and rugs with the
brush retracted:
^ Press the foot switch to the ö
position.
Clean hard flooring which is not
susceptible to scratching with the brush
protruding:
^ Press the foot switch to the ä
position.
Preparing for use
11