Problem Solving Guide - Miele G 645 Operating Instructions Manual

With the aid of the following guide, minor problems can be easily corrected
without calling in a Miele service technician, saving you both time and money.
You should, however, note the following:
,
Repairs should only be carried out by a suitably qualified and trained
person in accordance with local and national safety regulations. Unauthorised
or incorrect repairs could cause personal injury or damage the appliance.
Problem
The "Start" indicator
light does not flash after
the appliance has been
switched on with the
"On/Off" button.
The dishwasher does
not start after the "Start"
button has been
pressed; the "Start"
indicator light is
flashing.
The dishwasher stops
during a programme.
Possible cause
The door is not properly
closed.
The appliance is not
plugged in.
The fuse is defective or
has tripped.
The programme selector
is at the "Stop" position.
The fuse is defective or
has tripped.

Problem solving guide

Remedy
Close the door firmly.
Insert the plug.
Replace the fuse
(see data plate for
minimum fuse rating).
– Turn the programme
selector to the required
programme.
– Press the "Start" button.
Replace the fuse
(see data plate for
minimum fuse rating).
43