Miele G 653 Installation Instructions Manual page 7

^ Align the cover plate to the front
edge of the worktop in the
the niche.
If the worktop has a
edge, pull the cover plate further for-
ward so that the reflector panel is still
visible later on.
^ Use the tacks supplied to nail the
cover plate to the underside of the
worktop.
Worktops with wood or laminate edg-
ing:
Nail the tacks through the holes fur-
ther back from the edge.
^ Use soapy water to wipe off any ex-
cess sealant.
^ Press the reflector panel into the
of
plastic holder in the cover plate.
7