Problem
The "End" and "Start"
indicator lights flash
simultaneously
Possible cause
There may be a technical
fault.
Problem solving guide
Remedy
– Turn the programme
selector to the "Stop"
position.
– Switch the dishwasher
off using the "On/Off"
button.
After a few seconds:
– Switch the dishwasher
on using the "On/Off"
button.
– Turn the programme
selector to the required
programme.
– Press the "Start" button.
If the indicator lights flash
again, there is a technical
fault.
– Call the Miele Service
Department.
Despite the problem the
dishwasher can be used
in all programmes,
however the water will not
heat up.
45