Miele G 640 Operating Instructions Manual page 44

Problem solving guide
Problem
The indicator light
"Inlet/Outlet" is flashing
and the programme
does not continue
44
Possible cause
Water intake is restricted.
Water outlet is restricted.
Water remains in the
wash cabinet at the end
of a programme.
Remedy
Before rectifying the
problem you must:
– Turn the programme
selector to the "Stop"
position.
– Switch the dishwasher
off using the "On/Off"
button.
– Open the stopcock
fully.
– Check the water inlet
filter and clean if
necessary, see
"Cleaning the water
inlet filter".
– Check the water level
and if necessary
increase the water
intake time, see
"Increasing the water
intake time".
– Clean the filter
combination, see
"Cleaning and Care".
– Clean the drain pump.
– Clean the non-return
valve, see "Cleaning
the drain pump and
non-return valve".
– Remove any kink in the
drain hose.