Miele G 603 Installation Instructions Manual page 6

When the dishwasher is built-in, the
left hand side of the reflector panel
must be sited above the in-operation
light in the dishwasher control panel.
The procedure for fitting the reflector
panel will depend on the type of
worktop.
On
reflector panel is fitted together with the
protective cover plate.
The reflector panel is fitted without the
protective cover plate on
6
.
The underside of the worktop is pro-
tected against steam rising from the
machine by a special cover plate.
A plastic holder is located on the left
hand side of the cover plate for the
dishwasher's control light reflector
panel.
,
If two different materials meet up
at the front edge of the worktop, then
the join must be concealed by the
cover plate.
^ Remove the protective backing from
the cover plate.
the
^ Squeeze sealant from the tube sup-
plied all the way along the hollow
moulding in the cover plate.