Table of Contents
Advertisement
Installing integrated "i" Dishwashers
8. Matching the plinth facing
of a kitchen run
The plinth area of the dishwasher is
normally covered with a plinth run
matching the kitchen furniture.
The height (H) of the plinth facing in
front of the dishwasher depends on the
plinth return (R) and how much the
door front extends below the
dishwasher door (P).
20
^ Place the plinth facing directly in front
of the kitchen run but do not attach.
^ Carefully open the dishwasher door.
If the door front comes into contact with
the kitchen plinth when the dishwasher
door is opened the plinth facing in the
area behind the dishwasher door needs
to be cut to size.
^ To do this mark where the edge of the
door front comes into contact with the
plinth facing.
^ Cut the plinth facing to size along this
line.
^ Place the plinth facing in front of the
kitchen run again and check whether
the dishwasher door can be opened
fully.
If it cannot, trim the plinth facing
again until the correct size is
achieved.
^ Secure the plinth facing to the
adjacent kitchen units in accordance
with the kitchen furniture
manufacturer's instructions.
If your kitchen does not have a plinth
run matching the kitchen furniture, the
plinth area can be covered with a
separate plinth kit, available at extra
cost (special accessory).
Hide quick links:
Advertisement
Table of Contents
