Table of Contents
Advertisement
^ Hang the fixing bracket into the slits
in the machine door outer panel.
^ Push the overhanging ends of the
templates under the facia panel.
^ Adjust the fixing bracket a:
The long holes in the machine outer
door must be aligned with the
matching markings on the template.
^ Mark the height of the top edge of
adjacent kitchen base unit doors on
the template b.
Installing integrated "i" Dishwashers
^ Take off the fixing bracket.
^ Lay the door front down with the rear
^ Lay the bracket on the rear side of
– the marks on the template for the
– the fixing bracket must be the same
^ Use strips of adhesive tape to hold
side facing upwards.
the door front and adjust so that:
upper edge of the adjacent base unit
doors match the top edge of the
door front.
distance from the left and right hand
side edges of the door front.
the bracket in this position.
15
Hide quick links:
Advertisement
Table of Contents
