Installing Integrated "I" Dishwashers - Miele G 601 Installation Instructions Manual

Integrated ("i") dishwashers
"i" dishwashers are specially designed
for building under a continuous
worktop.
– The control panel with its
accessories is included with the "i"
dishwasher in a separate package
for on-site fixing.
– The front of the dishwasher is
designed to take a front panel. It can
be fitted with a base unit door front to
match the rest of the kitchen.
– The dishwasher does not have a
plinth facing. The plinth area of the
dishwasher needs to be covered
either with a plinth facing to match
the kitchen furniture or with one
which can be ordered as a special
accessory. The separate plinth
facing can be height adjusted to suit
the kitchen. The plinth return is freely
adjustable.
Instructions for installing the
dishwasher are described in the
following sections.
An "i" model dishwasher can be
converted into a built-under "U"
dishwasher.
– A decor set GDU must be used.
– A plinth facing to cover the plinth
area is supplied with the decor set.
The plinth facing can be adjusted to
match the height of adjacent plinths.
The plinth return is freely adjustable.
The decor set is supplied with a
separate installation booklet.

Installing integrated "i" Dishwashers

,
del dishwashers must only be
installed under a continuous worktop
which must be securely screwed to
neighbouring units.
,
installed under a hob. The high
radiant temperatures which are
sometimes generated by a hob
could damage the dishwasher.
,
fan, moist air is expelled through the
vent outlet in the front of the machine
at the end of a programme. It
continues to be expelled for a
certain length of time or until the
door is opened.
To prevent damaging surrounding
fittings (e. g. worktops with wood
edging) the fan running time can be
increased by 14 minutes (see
"Additional functions" in the
Operating Instruction manual for the
machine).
To ensure stability, "i" and "U" mo-
The dishwasher must not be
On dishwashers with a drying
5