Miele G 1832 Operating Instructions Manual page 49

Problem
In the display for the
Without heater
programme, the
following fault
message appears:
Water intake temp. too
low
The buzzer sounds.
The following fault
message appears in
the display:
Drain fault F11
Possible cause
The intake water has not
reached the required
temperature of 45 °C (see
Connection to the
water supply).
Water outlet is restricted,
water remains in the wash
cabinet at the end of a
programme.
Problem solving guide
Remedy
– Start the programme
again.
– If the fault message
appears again, select a
different programme.
Before rectifying the problem
you must:
– Switch the dishwasher off
with the On/Off sensor s.
– Clean the filter
combination. See Cleaning
and care.
– Clean the drain pump. See
Maintenance.
– Clean the non-return valve.
See Maintenance.
– Remove any kink in the
drain hose.
49