Initial Camera Setup - Vivitar ViviCam S830 User Manual

Initial Camera Setup

Installing and Charging the Battery
 To Charge the Battery:
1. Insert the battery (as shown above).
2. Power off the camera.
3. Connect one end to the supplied USB cable
to the camera and the other end to the
computer's USB port or to the AC Charger
(which is then connected to a standard wall
socket).
4. Allow the battery to charge for at least 3
hours before using the first time.
The charge light will turn off when the battery is
fully charged.
Turning On the Camera
Installing the Memory Card
 SD Memory card (up to 32GB)
needed for normal use.
Using the Camera
4