Connecting The Camera To The Computer - Vivitar ViviCam S830 User Manual

7) Please wait while the application is being installed on your computer.
8) Please review the license terms.
On PC and Macintosh: Click the "I accept the terms of this license agreement" and then click "Next"
to continue.
9) On PC only: Let the "Vivitar Experience Image Manager" installer create the folder to where the
program will be installed, and then click "Install".
10) Please wait while the application continues the installation process on your computer.
On Macintosh: If needed, please follow instructions to install the Adobe® Flash® Player.
11) On PC: Click the "Close" button when the installation is complete.
The application will automatically open.
On Macintosh: Click the "Quit" button when the installation is complete.
Click the "Launch Vivitar Experience Image Manager" to open the application
12) If you close the application you can run the Vivitar Experience Image Manager from the Programs
(PC) or Application (Mac) menu on your computer.

Connecting the Camera to the Computer

1) Use the supplied USB cable to connect your camera to your computer.
Insert the smaller end of the USB cable to your camera's USB slot and the larger end of the USB
cable to the USB port on your computer.
2) Power the camera on.
3) The first time you connect the device to the computer you will have to wait a few seconds until the
computer recognizes the device.
45