Vivitar ViviCam S130 User Manual page 8

NOTE:

After the camera is powered on, an SD icon will appear on the LCD display. If you do not see
the SD icon on the display, please check if the card was inserted properly.

Make sure the SD card is not locked (check the lock switch on the side of the SD card). If the SD
card is locked this will prevent the camera from saving captured photos to the SD card.
Power On
Press the POWER button to turn on the camera.
2) Setting the Camera Language

You will first be prompted to select a language for the camera.
The Language options appear. Drag up or down to scroll and view the menu options.

Select the language of your choice and tap SAVE & EXIT to confirm the selection.

After selecting a language, you will be asked if you would like to continue with the initial
camera setup. The following message appears: "Continue with Camera Setup?"
Tap "Yes" to continue or "No" to exit the setup.
NOTE: If you select "No" and decide to leave the camera setup, the camera will be set to its
default settings. These settings can be adjusted at any time manually through the menus of the
camera.
7