Vivitar ViviCam S130 User Manual page 7

B. Charge the battery using the USB connection cable (included) and the AC Charger (included):
- Connect one end of the USB cable into the USB port on your camera.
- Connect the other end of the USB cable to the AC Charger and then plug the AC Charger into
a power socket.
- The charge light will turn off when the battery is fully charged.
NOTE:
Some camera features will not work if the battery power level is low.
When the battery power is low the battery icon turns red and the camcorder automatically turns off
a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power
SD Memory Card
Make sure an SD card has been properly inserted into your camera. (SD card not included.)
To properly insert the SD Card:

Push the SD card into the slot in the direction shown on the camera (see SD icon by the SD
card slot).

Push the SD card until you hear a slight clicking sound. This indicates the SD card has been
inserted correctly.
Medium battery power
6
Low battery power