Initial Camera Setup - Vivitar ViviCam i7 User Manual

INITIAL CAMERA SETUP

INSTALLING THE BATTERIES
Make sure the batteries have been inserted properly into your digital camera,
according to the polarity shown inside the battery compartment.
See illustration above.
Use 3x AAA (1.5v) batteries. Alkaline batteries are recommended.
Batteries not included.
NOTE:
 Remove the batteries from the camera when not in use for an extended period.
 Do not mix alkaline and non-alkaline batteries.
 Rechargeable batteries not recommended.
 Some features, such as Flash, will not work if the battery power level is low.
 When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power Medium battery power
20
Low battery power