Table of Contents
Advertisement
When powering the camera ON for the first time the camera will take you through the INITIAL
CAMERA SETUP.
Powering the Camera ON
1)
Make sure the batteries have been inserted properly into your digital camera.
Use 2x AAA (1.5v) batteries (not included). Alkaline batteries recommended.
2)
Make sure an SD card (up to 32 GB) has been properly inserted into your camera - until a
click sound is heard.
Note: After the camera is powered on, an SD icon will appear on the LCD display.
If you do not see the SD icon on the display, please check if the card was inserted properly.
3)
Press the POWER
Setting the Camera Language
You will first be prompted to select a language for the camera. The Language selection menu will
appear. Select the language of your choice and press the OK button to confirm the selection.
Setting the Date and Time
The next step in the initial camera setup is to set the date and time on the camera.
Set the Date and Time as Desired and press the OK button to confirm the selection and finish the
camera setup.
The camera is now ready to capture photos and videos.
Note: If you press MENU and decide to leave the camera setup, the camera will be set to its
default settings. These settings can be adjusted at any time manually through the menus in the
camera.
button to turn on the camera.
5
Hide quick links:
Advertisement
Table of Contents
