Cleaning And Care; Housing - Miele DA 5000 D Operating And Installation Manual

Cleaning and care

A range of Miele branded cleaning and
conditioning products is available to
order from Miele (see back page for
details) or via the internet at
www.miele-shop.com.
,
Halogen lamps get very hot
during use and remain hot for some
time after being switched off. The
hot lamps are also susceptible to
damage from damp cleaning. Wait a
few minutes after switching off
before commencing cleaning.

Housing

General notes
The surfaces are susceptible to
scratches and abrasions. Please
observe the following cleaning
instructions.
^ All external surfaces and controls can
be cleaned using an E-cloth or with
warm water and a little washing-up
liquid applied with a well wrung-out
soft sponge or cloth.
Only use a damp cloth as water
could get into the appliance and
cause damage.
^ Wipe the surfaces dry using a soft
cloth.
18
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners,
and abrasive sponges, e.g. pot
scourers or sponges which have
been previously used with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with
stainless steel surfaces
^ Stainless steel surfaces can be
cleaned using the Miele E-Cloth or
with a suitable, non-abrasive,
proprietary cleaning agent, following
the manufacturer's instructions on the
packaging.
^ To help prevent re-soiling, a
proprietary conditioning agent for
stainless steel can also be used.
Important for appliances with glass
surfaces
^ Glass surfaces can be cleaned using
a proprietary non-abrasive cleaning
agent designed specifically for use
on glass.
Do not use:
– sharp metal tools,
– oven sprays.