Table of Contents
Advertisement
Use the cable clamp to secure the
cables together.
24
Feed the connection cable through a
suitable hole in the base unit. Con-
nect to the electricity supply with an
isolator which complies with national
and local regulations.
When pushing the control unit into
place, ensure that no connecting
cables are crushed or caught.
Push the control unit into the retain-
ing plate.
The pins of the control unit must se-
curely fit into the retainers on the re-
taining plate.
Fit the protective shelf and secure it.
The appliance must only be oper-
ated when it has been built-in.
Advertisement
Table of Contents
