Miele SE 213 Operating Instructions Manual page 11

Hob control units
Table of Contents

Advertisement

\
The fuse rating must be be in accord-
ance to national and local standards.
The appliance is supplied with a 3-core
cable for connection to a 230-240 volt
50 Hz supply.
The wires are coloured in accordance
with the following code:
Green/yellow = earth
Blue
= neutral
Brown
= live
The fuse rating is 32 amps.
The control unit is fitted with an approx.
1.8 metres long cable.
If the connection requires a different
cable, the Miele Service dept must
be consulted.
See the data plate for the maximum
rated load.
Q\}
}
Data relating to electrical connection
will be found on the data plate, located
at the rear of the appliance.
Make sure that these figures comply
with the main voltage.
Connection of this appliance should be
made via a suitable isolator which com-
plies with national and local regulations
The appliance is supplied with a 3-core
cable for connection to a 230-240 volt
50 Hz supply.
The wires are coloured in accordance
with the following code:
Green/yellow = earth
Blue
= neutral
Brown
= live
The fuse rating is 32 amps.
The control unit is fitted with an approx.
1.8 metres long cable.
If the connection requires a different
cable, the Miele Service dept must
be consulted.
11

Advertisement

Table of Contents
loading

Table of Contents