Table of Contents
Advertisement
The cable conduit must meet statu-
tory electrical requirements and
have an inner diameter of at least
23 mm for data cable und 29 mm
for power cable.
The conduit length should be suffi-
cient to ensure the cable cannot be
touched for the whole distance be-
tween the additional connector box
and thecontrol unit.
Do not install the control unit directly
above a hob or an oven. Exposure
to direct heat could be damaging.
The control unit must be separated
by a secured shelf from the rest of
the space in the wall unit, to make it
inaccessible.
20
Disconnect the mains electricity
supply to the appliance.
Install the hob.
Starting from the wall unit push the
cables into the ducting.
The plugs on the connecting cables
and the sockets on the hob are
coded with the same colour for
matching.
Connect the plugs of the connecting
cables into the corresponding
sockets on the additional connection
box, and connect the individual
wires according to the wiring plan
supplied.
Secure the connecting cables in the
connection box with the strain relief
clip.
Fit the hob plug into the socket.
Advertisement
Table of Contents
