Electrical Connection And Technical Data - Miele KM 84-2 Operating Instructions Manual

Ceramic
Table of Contents

Advertisement

Electrical connection and technical data

Electrical connection
General notes
Electrical connection of the appliance
should be undertaken by a qualified
electrician in strict accordance with
national and local safety regulations.
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA.
The Technical data table (next page)
gives details for each appliance.
The data plate gives the necessary
data for connection. See page 15.
Electrical connection U.K., AUS
The appliances are supplied with a
mains cable for connection to an a.c.
single phase 240 V (230 V), 50 Hz sup-
ply. The fuse rating and rated load are
given on the data plate.
For the KM 84-2 / KM 87-2 combiset
units connection should be made via a
fused plug (U.K. only) and switched
socket. The On-Off switch should be
easily accessible after the appliance
has been built in.
For the KM 94-2 / KM 97-2 combiset
units connection should be made via a
suitable isolator which complies with na-
tional and local safety regulations.
Electrical connection and technical data
(IRL, NZ, ZA)
Important:
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol z or col-
oured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
For U.K.: The wire which is coloured
brown must be connected to the termi-
nal which is marked with the letter L or
coloured red.
For Australia: The wire which is col-
oured brown must be connected to the
terminal which is marked with the letter
A or coloured red.
WARNING
THIS APPLIANCE MUST BE
EARTHED
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 87-2

Table of Contents