Destination Input - Mercedes-Benz COMAND Operator's Manual

Entering a POI ( Y page 74)
R
Entering a destination via the map
R
( Y page 72)
Entering a stopover destination
R
( Y page 73)
Entering a destination via "Search & Send"
R
Y
( page 217)
Entering a Destination via the
Address
i In some countries it is not possible to
enter addresses at vehicle speeds above
approx. 3 mph. The function becomes
available again as soon as the speed falls
below approx. 2 mph.
The following options are available for
entering a destination via an address:
Entering state/province, city/zip code and
R
street
Entering state/province, city and city
R
center
Entering state/province, city/zip code and
R
street and house number
Entering state/province, city/zip code and
R
street and junction
Entering street, state/province, city/zip
R
code and house number
Route calculation can then be started
( Y page 70).
Opening Enter Destination Menu
X
If necessary switch to navigation mode and
display menu system (
X
Select Destination£Address Entry.
The Enter Destination menu appears.
Y page 54).

Destination Input

Enter Destination menu
Menu Items in Enter Destination Menu
Some menu items are not available or not yet
available, depending on the address items
entered for the address or the data for the
digital map.
Example:
After the state/province has been selected
the menu items No., Center,
Intersection, Save and Start are not
available. Or the ZIP menu item is not
available if the digital map does not contain
any zip codes.
Selecting a State/Province
i You can only select those states/
provinces that are stored in the digital map.
X
Select State/Prov in the Enter
Destination menu.
A menu appears where you can choose one
of the following lists:
Last States/Provinces
R
States (U.S.A.) or
R
Provinces (Canada).
R
X
To select a list: Rotate
qmr.
X
Press n.
The selected state/province list appears.
63
or slide
ymz
Z