Mercedes-Benz COMAND Operator's Manual page 31

X
To select the next or previous scene:
Briefly press 9 or :.
X
To search for the next or previous
scene: Press and hold 9 or :.
Tel Menu
G
Warning
Some jurisdictions prohibit the driver from
using a cellular telephone while driving.
Whether or not prohibited by law, for safety
reasons, the driver should not use the cellular
telephone while the vehicle is in motion. Stop
the vehicle in a safe location before placing or
answering a call.
If you nonetheless choose to use the mobile
phone while driving, please use the handsfree
feature and be sure to pay attention to the
traffic situation at all times. Use the mobile
phone only when road, weather and traffic
conditions permit. Otherwise, you may not be
able to observe traffic conditions and could
endanger yourself and others.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
You can use the functions in the Tel menu to
operate your mobile phone.
X
Switch on COMAND (
X
Select the Tel menu (
Mobile Phone Status
If the mobile phone has not yet been
R
authorized, the message in the
multifunction display is:
Ready for Bluetooth Telephony...
( Y page 99).
If the mobile phone is switched on and
R
authorized, the message Phone READY
appears in the multifunction display.
Y page 34).
Y page 102).
Multifunction Steering Wheel
Accepting a Call
If someone calls you while you are in the
Tel menu, the following message appears in
the multifunction display:
X
Press 6 to answer a call.
You can also take a call if you have not
selected the Tel menu.
i The name of the caller only appears if it is
included in the phone book.
Rejecting or Ending a Call
X
Press ~.
You can also reject or end a call if you have
not selected the Tel menu.
Dialing a Number from the Phone Book
If your mobile phone is able to receive calls,
you can search for and dial a number from the
phone book in COMAND at any time.
i You can enter new numbers in the phone
book using COMAND .
X
Select the Tel menu.
The multifunction display shows
Phone READY.
X
Press :, 9 or a to call up the
phone book.
X
Press : or 9 to select the name you
are searching for.
The stored names are displayed in
alphabetical order.
X
If only one telephone number is stored
for a name: Press 6 or a to start
dialing.
The message Connecting Call... and
the selected number appear in the
29
Z