Mercedes-Benz COMAND Operator's Manual page 204

Radio and Satellite Radio
202
Selecting the Frequency (AM Range)
You can select frequencies within the AM
range (530 to 1710 kHz) directly. Voice
control also recognizes the words
"frequency" and "kilohertz".
Example of dialog:
s Five hundred and thirty kilohertz
u Voice control sets the frequency.
"Save Station"
Using the "Save station" command you can
give a voice name to the station currently
selected. You can also use this command to
improve voice recognition for difficult names
or if you want to use a name of your own. You
could, for example, save a station with the
name "Favorite station".
When you have given the command, voice
control prompts up to three times to say the
station name. When repeating the station
name, make sure that you pronounce it in
exactly the same way as you did the first time.
Otherwise, the name cannot be saved and
voice control aborts the saving procedure.
Example of dialog:
s Save station
t Please say the station name
s Favorite station
t Please repeat the station name.
s Favorite station
t The station has been saved.
"Select Station"
Using the "Select station" command, you can
select a station.
Example of dialog:
s Select station
t Please say the station name
s Favorite station
u Voice control sets the station
"Station 'Favorite Station'"
Using this command, you can select a station.
Example of dialog:
s Station 'Favorite station'
u Voice control sets the station 'Favorite
station'
"Select Category" (Satellite radio)
Using the "Select category" command, you
can select an available category.
Example of dialog:
s Select category
t Please say the category name
s News
u Voice control sets the category
"Category News" (Satellite Radio)
Use this command to select a satellite radio
category.
Example of dialog:
s Category news
u Voice control sets the category
"Enter Channel Number" (Satellite
Radio)
Use the command "Enter channel number" to
select a satellite radio category.
"Read Out Station List" and "Selecting
a Station"
Using the "Read out station list" command,
you can hear a list of all receivable stations
and choose one from your station list.
i If voice control does not recognize the
station name, have it read out the list of
stations. This allows you to check whether
you have saved the station you require in
the station list.
Example of dialog:
s Read out station list
The system reads out the station list.