Mercedes-Benz COMAND Operator's Manual page 112

Making Calls
110
X
To delete individual digits: Press briefly
the CLR button on the COMAND control
unit.
X
To delete an entire phone number: Press
and hold the CLR button until the number
is deleted.
X
To place a call: Press the 6 button on
the COMAND control panel or press the
6 button on the multifunction steering
wheel.
Entering a Phone Number from the
COMAND Controller
X
Open the phone main menu (
X
To enter digits: Select the required digits
in sequence.
X
To delete individual digits: Select õ
and briefly press the n button.
or
X
Press the 2 button next to the
COMAND controller.
X
To delete an entire phone number:
Select õ and press n until the phone
number has been deleted.
or
X
Press and hold down the 2 button next
to the COMAND controller until the entire
entry is deleted.
X
To connect a call: Select ° at the bottom
right-hand side of the input speller.
or
X
Press the 6 button on the COMAND
control panel or the 6 button on the
multifunction steering wheel.
Redialing
X
Open the phone main menu (
X
Select ° at the bottom right-hand side of
the input speller.
or
X
Press the 6 button on the COMAND
control unit when the phone main menu is
displayed.
The dialed calls list appears. The call dialed
last will be at the top of the list.
X
To select a call: Rotate
X
To initiate call: Press n.
Y page 102).
Initiating a Call to a Call List Entry or
COMAND Phone Book Entry
X
Call up a call list and select an entry
Y
(
or
X
Open the COMAND phone book and select
an entry (
X
To initiate call: Press n.
Functions During a Single Call
Phone mode with a single call
Other party
1
Symbol for active phone connection
2
Switches the hands-free microphone off
3
or on
Sends DTMF tones (not possible with all
4
mobile phones)
page 106).
Y page 103).
Y page 102).
or slide
ymz qmr