Controls; Setting The Clock; Time Defrosting - Magic Chef MCD990W Instruction Manual

CONTROLS

SETTING THE CLOCK

When the oven is first plugged in, the display will flash ":0" and a tone will sound. If the AC power
ever goes off, the display shows " : 0" when the power comes back on.
CLOCK
3. Enter the correct time of day by touching the numbers
in sequence.
4. Touch CLOCK pad.
CLOCK
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the CLOCK pad and re-enter the time.

TIME DEFROSTING

When DEFROST is selected, the automatic cycle divides the defrosting time into periods of
alternating defrost and stand times by cycling on and off.
DEFROST
3. Touch START pad.
When you touch START pad, the DEF indicator starts blinking to show the oven is in the DEFROST mode.
The display counts down the time to show you how much defrosting time is left in the DEFROST mode.
The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged. When
the defrosting time ends, you will hear 3 beeps.
1. Touch CLOCK pad.
This is a 12 hour clock system.
2. Touch CLOCK pad once more.
This is a 24 hour clock system.
1. Touch DEFROST pad.
2. Touch number pads for the
desired defrosting time.
NOTE : This oven has multiple clock
systems. If you want 12 hour
clock system, omit this step.
The display stops blinking, and the colon
starts blinking. If you selected 12 hour clock
system, this digital clock allows you to set
from 1:00 to 12:59. If you selected 24 hour
clock system, this digital clock allows you to
set from 0:00 to 23:59.
The DEF indicator lights and " : 0" is displayed.
The display will show what you touched.
Note : Your oven can be programmed for
59 minutes 99 seconds. ( 59 : 99 )
9