Janome 6019QC Instruction Book page 29

1
2
5
2
5
3
9
10
4
1
3
4
6
7
8
9
11
12
To sew:
Fold up the upper seam allowance. Fold back the
1
bottom seam allowance to form a 0.3 cm (1/8˝)
fold. Place the zipper teeth next to the fold and pin
it in place.
1 Bottom fabric
End of the zipper opening
2
Zipper teeth
3
0.3 cm (1/8˝)
4
5 Wrong side of the upper fabric
6 Opening size
7 Fold
8 Basting stitches
2 Attach the foot with the pin on the right. Sew
through all the layers from the end of the zipper
opening, guiding the zipper teeth along the edge of
the foot.
3 Stop the machine 5 cm (2˝) before the foot reaches
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Open the zipper, then
lower the foot and stitch the remainder of the
seam.
9 Slider
10 5 cm (2˝)
4 Close the zipper and open the upper fabric flat over
the zipper. Baste the upper fabric and zipper tape
together.
11 Basting stitch
Zipper tape
12
27