Download Print this page

Selecting Patches - Zoom Dual Power 510 Driver Operation Manual

Dual power driver

Advertisement

Selecting Patches

7
A 1
Bank switching
Banks A, b, C, d, E, F are available
PATCH
PATCH
DOWN
UP
Patch switching
24 patches are available
The 24 patches can be easily selected by
pressing the patch pedals. The right patch
pedal switches to the next patch and the
left patch pedal switches to the previous
patch.
In the initial condition, the 510 is set up
so that the patch pedals select patches
continuously, but you can also set up the
unit so that patches are switched only
within a certain bank of four patches. [For
details, see section 9 Patch Switching
(Application: Bank Hold ON).]
Banks are selected with the VALUE +/-
keys. Press the VALUE+ key to select the
next bank, and the VALUE- key to select
the previous bank.
For example, to switch from Patch 2,
Bank A to Patch 3, Bank C, the patch
pedal would have to be pressed nine
times. Instead, you can press the
VALUE+ key twice to switch to Bank C,
and then press the patch pedal (UP) just
once to select Patch 3.
Using the Bypass/Tuner Mode
8
The effects of the 510 can
Tuner ON/OFF
Pressing the EDIT key and the STORE key simultaneously for more than one second in
be turned off (bypassed)
Play mode will allow you to select whether or not to activate the tuning function in Bypass
temporarily, so that only the
mode. When you change the setting, the display will show"tunEr oFF" (tuning function off)
or "tunEr on" (tuning function on) according to the setting.
original sound of the
instrument is heard. In this
mode, the auto-chromatic
tuning function via the LED
display is also active.
Bypass mode
Pressing both patch pedals
simultaneously activates the
Press both
Bypass mode.
pedals together
Currently selected
patch is displayed
Press
To cancel the Bypass mode, simply press one of the patch pedals. The unit then reverts to the
previously selected patch.
Tuner mode
The 510 is initially set so that the auto-chromatic tuning function for the guitar activates
automatically when the Bypass mode is invoked. In Bypass mode, pick an open string to be
tuned. The closest note will be shown on the display.
Input signal
standby condition
&
& # w
Do = C
Re# = D#
w
Regular tuning
& # w
&
w
Do# = C#
Mi = E
Regular tuning
w
&
&
Fa = F
w
Re = D
4th string
When the tuning function is active, the parameter cursor
LEDs serve as tuning meter, designed to enhance tuning
precision during fine adjustments.
Turning tuning function off
If you do not want to activate the tuning function in Bypass
mode, press the STORE and EDIT keys simultaneously for
more than one second in Play mode. The tuning function will be turned off, and this setting will
be stored even when the power is turned off. When you turn the function off, the display will
show "tunEr oFF" (tuning function off).
To turn the tuning function on, press the same keys simultaneously again. The display will show
"tunEr on" (tuning function on).
NOTE: Please note that the tuning function may not operate properly if other effect modules between the
guitar and the 510 are on.
BANK F
PATCH 1
PATCH 2
PATCH 3
PATCH 4
BANK E
PATCH 1
PATCH 2
PATCH 3
PATCH 4
BANK UP
BANK d
PATCH 1
PATCH 2
A 1
PATCH 3
PATCH 4
BANK C
PATCH 1
PATCH 2
BANK DOWN
PATCH 3
PATCH 4
BANK b
PATCH 1
PATCH 2
PATCH 3
PATCH 4
BANK A
PATCH 1
PATCH 2
Bank/patch switching
PATCH 3
when Bank Hold is off
PATCH 4
(initial setting)
Calibration
A 1
Select reference pitch for auto-chromatic
guitar tuner (calibration).
* The reference pitch (A) can be adjusted in the range
from 435 to 445 Hz. When the BANK key is pressed
in Bypass/Tuner mode, this is shown as "35" to "45"
on the display for a second. Adjust to the suitable
value. At power-on, the setting is 440 Hz (40).
Bypass ON/OFF
The bypass function is invoked by pressing the left and right
patch pedals simultaneously.
To cancel the Bypass/Tuner mode, just press one of the
patch pedals.
Release immediately
Tuning function (only when the tuning function is ON)
Regular tuning
w
& # w
&
Fa# = F#
La = A
Regular tuning
& # w
w
6th string
&
La# = A#
So = G
1st string
3rd string
Regular tuning
w
& # w
&
So# = G#
Si = B
Pitch is too high
Correctly tuned
A 1
5th string
2nd string
Pitch is too low

Advertisement

loading

This manual is also suitable for:

510