Selecting Patches For Play - Zoom 506II Bass Operation Manual

Selecting Patches for Play

To try out the 506 II, we recommend that you simply play your
instrument while switching patches. This will let you quickly see what
the 506 II can do.
Power-on
When using the 506 II on batteries,
plug a shielded cable with mono phone
plug into the INPUT jack of the 506 II.
When using the 506 II with the AC
adapter, plug the adapter into the outlet
and plug the cable from the adapter
into the DC 9V jack on the 506 II.
Turn on the bass guitar amplifier and
adjust the volume to a suitable position.
Set 506 II to play mode
When the [PLAY/EDIT] selector is set to
a different position, set it to "PLAY".
A 1
The currently selected bank and
patch number are shown on the
display.
Bank Patch
Immediately after turning on power
number
to the 506 II, the unit will be in play
mode also if the [PLAY/EDIT]
selector is set to a different
position.
Switch patches
To switch patches in play mode, use the [
foot switches.
8
ZOOM 506 II
BASS
]/[ ]
Selecting Patches for Play
To directly switch
the bank
You can use the [+]/[-] keys to directly
switch among the banks A - F.
To adjust the master
volume
Keep both [+]/[-] keys depressed
for more than 1 second.
4 0
While the master volume setting is
shown, pressing the [+] or [-] key
changes the setting.
The setting range is 0 - 50. When the unit
is turned off and on again, the setting will
be reset to 40.
When using headphones, the
master volume setting can be used
to adjust the listening volume.
ZOOM 506 II
9
BASS