Chapter 3: Downloading Installers With Fiery Webtools; Setting Up Fiery Webtools - Fiery EX12 Installation Manual

3

3-1 Setting up Fiery WebTools

Chapter 3:
Downloading
Installers with
Fiery WebTools
T
O SET UP CLIENT WORKSTATIONS TO USE
1. Enable TCP/IP networking.
2. Make sure the workstation has a valid, unique IP address.
3. Make sure a supported Internet browser is installed on the computer.
4. Make sure Java is enabled in your Internet browser.
Fiery WebTools allow you to manage your Fiery remotely from the Internet or from
your company's intranet. The Fiery has its own home page, from which you can select
a variety of functions, including Status, WebSpooler, WebLink, Installer,
WebDownloader, WebSetup, and WebScan.
For more information on using Fiery WebTools, see the
Setting up Fiery WebTools
In order for network users to access and use Fiery WebTools, you must set specific
Fiery options in Network Setup and Printer Setup. You also must prepare each user's
computer to communicate with the Fiery over the Internet or intranet.
For more information about Network Setup and Printer Setup, see the
Configuration Guide.
For more information on supported browsers, see the
For more information on setting up the Fiery and the network, see the
Configuration Guide.
F W T
IERY EB OOLS
Quick Start
Printing Guide.
Guide.