Setting Up Ipp Printing With Windows 2000/Xp - Fiery EX12 Installation Manual

1
1-36 Installing User Software on a Windows Computer
4. Double-click the name of the connection you want to print to.
The Printers dialog box appears, asking whether you want to set up the printer.
5. Select Yes to complete the installation for the selected connection.
Windows NT 4.0 downloads the printer driver and printer description files from the
Fiery to your computer and installation is complete.
Windows 2000 displays a dialog box telling you that the Fiery does not have the
correct printer driver installed and asks if you want to install the driver on your local
computer.
6. On Windows 2000, select OK, and then follow the procedure for installing printer
drivers on page

Setting up IPP printing with Windows 2000/XP

With Internet Printing Protocol (IPP), print jobs are sent to the Fiery over the
Internet.
IPP printing is supported directly for Windows 2000/XP computers. IPP printing is
not supported on Windows NT 4.0.
The IPP setup procedures are performed after installing the appropriate printer
N :
OTE
drivers (see "To install the PostScript printer driver for Windows 2000/XP"
page 1-18).
B
EFORE YOU BEGIN
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing in Network Setup > Service
Setup > IPP Setup.
3. Specify the printing destination on your computer.
1-18, starting with step 5.
on