Installing The Postscript Printer Driver For Windows 9X/Me - Fiery EX12 Installation Manual

1
1-2 Installing User Software on a Windows Computer
If you are printing using SMB (Server Message Block), you can connect to the Fiery
and install the printer drivers in a single procedure. For more information, see
up SMB printing with Windows 9x/Me"

Installing the PostScript printer driver for Windows 9x/Me

The following procedure describes installing the printer driver from the User
Software CD or from the Installer WebTool. Subsequent procedures describe setting
up the print connection.
The following procedures use Windows 98 illustrations; Windows 95 and
N :
OTE
Windows Me differences are noted.
T P S
O INSTALL THE OST CRIPT PRINTER DRIVER FOR
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers window, double-click the Add Printer icon and click Next.
3. Specify printing using a Local printer and click Next.
This procedure describes the installation of a local printer. You can modify the
connection later, according to your network type.
4. In the dialog box displaying lists of manufacturers and printers, click Have Disk.
The Install From Disk dialog box prompts you for the disk.
5. If you are installing from the CD, type the name of the CD-ROM drive (for example,
D:\), and click Browse. Browse to English\Prntdrvr\Ps_drvr\Win_9x._ME.
If you are installing from the files you downloaded using the Installer WebTool,
browse to prntdrvr\Prntdrvr\Ps_drvr\Win_9x_ME.
6. Make sure "Oemsetup.inf" is selected and click OK.
The path is copied to the Install From Disk dialog box.
on page 1-12.
W 9 /M
INDOWS X E
"Setting