Setting Up Ipp Printing With Windows 9X/Me - Fiery EX12 Installation Manual

1
1-14 Installing User Software on a Windows Computer

Setting up IPP printing with Windows 9x/Me

With Internet Printing Protocol (IPP), print jobs are sent to the Fiery over
the Internet.
IPP printing is supported on Windows 2000/XP but can be enabled on
Windows 9x/Me computers by installing the "wpnpins.exe" client file (available on the
Windows Me CD or the Windows 2000 Server CD). For more information about
obtaining and installing this client, contact the Microsoft Corporation or Microsoft
Technical Support.
The IPP setup procedures are performed after installing the appropriate printer
N :
OTE
drivers. See "To install the PostScript printer driver for Windows 9x/Me"
IPP printing is not supported on Windows 95.
N :
OTE
B
EFORE YOU BEGIN
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing.
For more information, see the
3. Specify the printing destination on your computer.
T IPP
O SET UP PRINTING WITH
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers windows, right-click the icon for the Fiery PostScript printer driver and
select Properties.
3. Select the Details tab and click Add Port.
The Add Port dialog box appears.
Configuration Guide.
W 9 /M
INDOWS X E
on page 1-2.