Xerox DocuColor 12 Supplement Manual page 10

NOTE: Remember the following when selecting
the Staple options:
•
•
2 •
NOTE: For more information on using the In-Line
Stapler Finisher, refer to the DocuColor 12/
Document Centre ColorSeries 50 In-Line Stapler
3
Finisher User Guide.
1 Under Copy Output on the Basic Copying tab,
4
touch the Stapling & More button.
2
On the Copy Output screen, touch the Collated
5
(Staple Options) button.
6
7
CUSTOMER EPC SUPPLEMENT
Stapling options can not be selected when
using Paper Tray 5.
Sets of more than 50 sheets cannot be
stapled. If a set contains more than 50 sheets
and stapling is selected, it will not be stapled.
No error message will appear.
Documents containing different page sizes
can be stapled if all of the sizes in the
document are supported by the In-Line
Stapler Finisher and the feed edge of each
paper is the same length.
Figure 2: Basic Copying tab
Figure 3: Copy Output screen
6 DOCUCOLOR 12/DCCS 50