Advertisement
WebTools
Windows
software
If you are using Windows 95, make sure that the frame type selected in Windows 95
matches the one selected on the DocuColor. See Getting Started for instructions.
Windows NT 4.0
Because of a problem with Microsoft's PostScript driver for Windows NT 4.0, some valid
PPD selections are not allowed and the setting is ignored. Features supported in the
Windows NT 4.0 PPDs require the Adobe PSPrinter driver for Windows NT, which is not
available from Adobe at this time.
Disk drive full error message
The DocuColor requires up to 200MB hard drive workspace in addition to the amount
required for any specific job. Make sure you have at least 200MB plus the size required by
your current job.
You can free up disk space by deleting old jobs.
WebSpooler and Installer buttons
The first time the WebTools are accessed, the WebSpooler and Installer buttons may not be
available. To make them available, click the Configure button and enable both WebTools.
RIPped jobs in WebSpooler
Jobs that have already been RIPped (rasterized) do not respond to a double-click command.
These jobs are queued for printing and their job properties cannot be viewed or edited.
Tray selection is not supported in the WebSpooler Override Print Settings dialog box on
Windows NT 4.0.
Adobe PostScript Printer Driver for Windows
To avoid potential problems upgrading driver versions, follow the instructions for removing
a printer driver in the README file before starting to install a new version of driver.
With version 4.2 of the Adobe PostScript Printer Driver for Windows 95, the Paper tab
does not display the A6 paper size icon. You are, however, able to select the A6 paper size by
clicking on the area where the icon should appear.
Do not click Add Printer in the Printers Control Panel to set up the DocuColor. This sets
up the printer for the Windows PostScript Printer Driver.
Pattern fills may not print correctly with some applications. Try printing with the Windows
PostScript Printer Driver or a different application.
Changing colors on monitor
If your monitor is set to 256 or fewer colors, you may notice some color palette changes on
the screen when you are connecting to printers with a remote utility. A color bar in a
random color may also appear across the bottom of the screen. You can ignore the monitor
color changes. Colors print normally.
User Intervention error with Windows 95
If you encounter a User Intervention error, wait until the DocuColor status is Idle , restart
the DocuColor, and finally restart Windows 95.
Page 4
Advertisement
