Inputs And Connections; Connecting The Usb Cable - Fluke Ti20 User Manual

Inputs and Connections

Connecting the USB Cable

The included USB cable can be used to either download or upload data from a PC to the
Imager. To connect the USB cable, insert the smaller USB connector into the Imager port
and the larger connector into the PC USB port as shown in Figure 1-9. Communications
begin automatically, and a USB symbol (I) appears in the header area of the Imager
display when communications are established.
Ti 20
THERMAL IMAGER
Figure 1-9. Connecting Using the USB Cable
Getting Started
Inputs and Connections
dag009f.eps
1
1-13