The Setup Menu - Fluke 922 User Manual

HOLD, SAVE, CALCULATE, SHIFT, MIN MAX, ZERO, and SETUP UNITS can be
used when measuring pressure, velocity and flow.
If Por V is pressed before pressing I for the final time, the Meter will escape
the flow setup process and will not save any of the selections made or values entered.

The Setup Menu

Use the Setup menu to change the following Meter parameters:
Pressure units
Velocity units
Flow (Volume) units
Temperature units
Duct dimension units
To modify the Meter setup parameters:
From any screen, press S to enter Setup menu editing mode.
1.
Use D and E to change the measurement units. Hold down D or E to
2.
increase the rate of change.
Notes
Airflow Meter
The Setup Menu
17