Hold; Saving Samples - Fluke 922 User Manual

intermittent readings, record maximum and minimum readings while you are away or when
you cannot watch the Meter.
To use Min Max mode, press
M
press of steps through the minimum, average, and live readings, and back to the
maximum reading.
To exit Min Max mode, press
the Auto-off feature is automatically disabled.

Hold

Pressing H captures the current reading and holds it on the display. If H is pressed
while in Min Max mode, the reading is held on the display and Min Max mode continues to
store minimum and maximum values.

Saving Samples

The Meter saves various samples in its three major modes. To save a sample, do the
following:
When taking a sample, press I to store the sample. The Meter can save up to 99
1.
samples in each of its three modes.
Once the samples are taken, press G to view the average of all the samples.
2.
M
. The maximum reading appears first. Each subsequent
M
for approximately two seconds. When in Min Max mode,
Airflow Meter
Saving Samples
11