Setting Up
the Adapter
The instructions that follow in this chapter parallel the steps contained in the
Actiontec Connection
to setting up the
USB
first, before attempting any other procedures.
M
Caution: Do not plug in the Adapter until instructed during the
installation procedure.
1. Insert the Installation
starts automatically. Temporary files and drivers for the Adapter are
1-2-3
loaded onto the hard drive, then the first Connection
Read the onscreen instructions, then click Next.
☞
Note: If Connection
Start from the desktop, then select Run. Type
(with "d" representing the drive letter of the computer's
drive) in the "Open" text box, and click OK.
ROM
®
setup utility, which provides a visual, step-by-step guide
1-2-3
Adapter. It is recommended the user run Connection
in the
CD
CD-ROM
does not start automatically, click
1-2-3
drive of the computer. Connection
1-2-3
d:\c123.exe
5
3
1-2-3
screen appears.
CD-