Hpna Settings - ActionTec V1000H User Manual

4. If applicable, enable VLAN tagging by clicking in the radio button next to
Enable under step; 4, then entering a VLAN ID (1 to 4094) and selecting a
Priority (0-7).
Add to add the VLAN to the VLAN list, which appears at the bottom of
5. Click
the screen.
You can also delete existing VLANs by clicking Delete, or modify a VLAN's set-
tings by clicking Modify.

HPNA Settings

The HPNA Settings screen allows you to enable HPNA. Click in the Enable radio
button to activate.
Chapter 5 Advanced Setup
49