ActionTec WirelessTV Quick Start Manual

MWTVkit_QS12_QS sngl pnl 9/8/11 12:27 PM Page 1
A B
How MyWirelessTV Works Connect the Cables
MyWirelessTV allows you to place an HDTV anywhere in your 1
Step
a
home because it transmits your video and audio wirelessly.
MyWirelessTV Kit. Plug the smaller end
of the power supply into the 5VDC
port on the back of the Transmitter.
1
Step b
power supply into a power outlet.
Make sure you identify which 'source device' that you want to
connect to the Transmitter. Video from that 'source device' will
be transmitted to your receiver box(s).
SOURCE
INSTALLATION for the MyWirelessTV is EASY. Both units come DEVICE
pre-paired to work with each other. All you need to do is connect
the cables according to the diagram or, if you want, follow the
detailed step-by-step instructions.
Note: Only use power adapter, Leader Electronics Inc., Model MU12-G050200-A1
1
Step
c
Make sure the Power Light
on the Transmitter is SOLID Green.
Get one power supply from
Note: The Sync light may blink
Plug the larger end of the
(Optional)
HDTV
Do NOT place the MyWirelessTV
Transmitter or Receiver on top of
3
or near a heat-generating source.
(Optional)
2
7
1
POWER
OUTLET
TRANSMITTER *Range subject to change. Walls, ceilings
MWTV200T
and floors may reduce the wireless range.
If you are using the Transmitter and Receiver in the same
room, please skip to step 3a
2
Step
a
Unplug the HDMI cable from
the back of the Source Device (ie: a
cable/ satellite set-top box, Blu-ray
player, etc.). Plug this free end of the
HDMI cable into the HDMI Out to TV
port on the back of the Transmitter.
Please note this step is optional. You
are not required to use the HDMI out
to TV port on the Transmitter.
CAUTION
HDTV
5
(Optional)
Please refer to 4
this illustration
while connecting
cables 6
POWER
OUTLET
Up to
150 ft.
range*
RECEIVER
MWTV200R
3 4
Step Step
a e
Get an HDMI cable from Wait 30-45 seconds. All 3
lights on the Receiver should be
MyWirelessTV Kit. Plug one end of this
HDMI cable into the HDMI Input GREEN.
port on the back of the Transmitter.
3
Step b
Note: If the Sync Light is SOLID Orange, wait another 10-15 seconds. It should turn
Plug the other end into
GREEN. If the Sync Light stays Orange or Red, you will need to manually pair the units.
the HDMI port on the Source Device
Please refer to the user manual for more information.
from Step 2.
5
Step a
Get the second HDMI cable
4
Step from MyWirelessTV Kit.
a
Get the second power
supply from MyWirelessTV Kit. Go to
the HDTV that you want to connect.
5
Step b
Plug one end of this HDMI
4
Step b cable into an HDMI port on the HDTV.
Plug the smaller end of the
power supply into the 5VDC port on
the back of the Receiver.
5
Step
c
Plug the other end of the HDMI
4
Step
c cable into the HDMI Out to TV port on
Plug the larger end of the
the back of the Receiver. The HDTV
power supply into a power outlet.
should now be connected to the Receiver.
5
Step
d
Turn on the HDTV near the Receiver. Make sure you
4
Step d
have selected the correct source input. You should be able to see
Make sure the Power Light
video from the source device.
on the Receiver is SOLID Green.
NEXT
Flip this Quick Start Guide over to continue